Multiscale modelling and design for engineering applications seminar

01/01/2013 00:00 - 01/01/2013 00:00  

 

We have a ready answer, we are in a quest of a correct question… but if our answer is wrong we are willing to find new solution in our next operational year

MULTISCALE MODELLING AND DESIGN FOR ENGINEERING APPLICATION
- Material Modelling -moorning
- Multiscale Design -afternoon

Numeric modelling has been used to optimize single scale processes over decades. The rapid increase in computational power has enabled combining modelling tools and thus a more comprehensive phenomena understanding. As a research institute of applied research VTT has taken a major step towards multiscale modelling of real industrial processes & phenomenas.

We invite you to hear the outcomes from a first year of a VTT innovation program Multiscale Design, where know-how in different disciplines of technologies is combined. Volume of the program was over 5 million Euros during the year 2012. In this program we are creating tools and approaches for the single processes to discuss and to merge with each other. Our goal is to raise the Finnish multi-dimensional modelling to the top of the world.

The way we work:
- Finding the critical points using case examples
- Consistent practices (methodology) development
- Sensitivity to customer needs listening
- Material and component development into cost-efficiency and life-cycle models

Register by: 3.2.2013 16:00

Register, decline or edit your information by clicking the link.

Seminar Programme:
MATERIAL MODELLING

09:00 – 09:10 Welcome – Erja Turunen
09:10 – 09:35 Multiscale modelling of engineering materials – Anssi Laukkanen
09:35 – 09:45 Materials modelling research in VTT – Kim Wallin
09:45 – 10:05 Coffee
10:05 – 10:50 Effects of Structure, Doping & Environment on the Tribochemistry of DLC – Judith Harrison
10:50 – 11:00 Introduction on the IMAGO project – Maria Oksa
11:00 – 11:20 Modelling of friction and structural transformations in diamond like carbon coatings – Helena Ronkainen
11:20 – 11:40 Molecular dynamics simulations of mass transport in chromium oxide scales – Jukka Vaari
11:40 – 12:00 μFEM modelling of wood cell deformation under pulping-type dynamic loads – Stefania Fortino
12:00 – 13:00 Lunch, Amica Restaurant/KCL House

MULTISCALE DESIGN

13.00 – 13.15 MultiDesign Innovation Program – Tarja Laitinen
13.15 – 13:40 Vertical multiscale modelling – Alejandro Revuelta
13.40 – 14.05 Combined CFD, material and system level analyses – Case Naantali power plant –Jari Lappalainen
14.05 – 14.30 Coffee
14.30 – 14.55 Combined structural analyses and system level simulation – Cases 1) TVO PAMS and 2) Apros-Abaqus Co-use – Pasi Laakso
14.55 – 15.20 Optimizing life-cycle environmental performance of a value chain with MultiDesing approach – Tuomas Helin
15.20 – 15.45 Business opportunities, demo cases – Tuomas Pinomaa
15.45 – 16.00 Discussion

Seminar is free of charge.

Welcome!

CUSTOMER SERVICE
Emailinfo@vtt.fi
Tel.+358 20 722 7070
Opening hours Mon - Fri 9:00 - 11:00 and 12:00 - 15:00, UTC +2 time zone

CONTACT US

P.O. Box 1000, FI-02044 VTT, Finland
Tel. exchange +358 20 722 111
Opening hours Mon - Fri 8:00 - 16:30,
UTC +2 time zone

CUSTOMER SERVICE

info@vtt.fi
Tel. +358 20 722 7070
Opening hours Mon - Fri 9:00 - 11:00 and 12:00 - 15:00,
UTC +2 time zone