Sign In

PRINSE'16 Programme

 

​Tuesday 7th June 2016

​​​​Session 1: OPENING and WEARABLE

​10.00-11.40 Invited speeches (20min)
Opening and welcome, ​PrintoCent todayHarri Kopola, VTT
​Printed Electronics 2016-2026: Trends, New Progress and Outlook​​Raghu Das, IDTechEx
​A Solution to the Venture Gap Edward Schneider, Spirit Ventures
​Wearable technology and the Future of FashionAmanda Cosco, Electric Runway
​Combining PE and IoT wearable health care solution; case Movesole​Eero Kaikkonen, Movesole

Break  5 min

11.45 - 12.30    Company pitches​ (5min)
​Tespack - the future of energy - combining technology, renewables and design in wearables​​Mario Aguilera, Tespack
​Wireless performance testing of wearable electronics​​Risto Timisjärvi, Verkotan
​​Flexible and 3D touch sensorsIlkka Varjos, Canatu
​Breakthrough sodium battery technology​David Brown, BroadBit Batteries
Think flat - Do moreTommi Rintala, New Cable Corporation
Screensavior coating material solutionsJohnny Pehkonen, Optitune
​​​PrintoCent Designer's Handbook: Practical take on technologyAntti Juusti, Neficon
12.30 - 14.00 Lunch - Demos, Bazar, Matchmaking​ ​

Session 2: LIGHTING AND AMBIENT INTELLIGENCE

​14.00-15.40 Invited speeches (20min)
​Digital light NOWJari Vuorinen, Lighting Design Collective
​Product launch​Pekka Makkonen, Flexbright

​Developing new technologies with vehicle manufacturers​

Janne Ilonen, Pilkington Automotive Finland

Lighting and ambient intelligence -seen from business lensesLaurent Chollat, Tikkurila

Smartening up Traditional Retail

​Mansoor Siddiqi, NuStartVentures
Break  5 min
15.45 - 16.30   Company pitches​ ​(5min)
​iLUMNET – intelligent lighting control and services​Kari Kananen, Valopaa
Micro and nanostructured film optics by Roll-to-Roll UV-Curing EmbossingSamuli Siitonen, Nanocomp
​Temicoat the new brand nanoimprint lithography​Thomas Kolbusch, Coatema GmbH
​Elcoflex - Mass Production with Truly Roll-to-Roll Facilities​Juho Paavola, Elcoflex Oy
​​Improving Yield on Printed Electronics R2R processAntti Takaluoma, Offcode
​Converting traditional printing to printed electronicsTeemu Pärnänen, PremiOC
​A New Class of Printable Siloxane Dielectrics and Conductors​​​Jarkko Heikkinen, Inkron

16.30 - 18.00 PILOT FACTORY VISITS / University of Oulu and Oulu University of Applied Sciences ​

Bus leaves after the session  ~16.30 to Oulu University of Applied Sciences  for a 30 min Pilot Factory visit. After the visit the bus takes you back to Hotel Scandic.
Also possibility to go directly to Hotel Scandic, bus leaves after the session ~16.30.
After University of Oulu Pilot Factory visit bus leaves  to Hotel Scandic at 17.30. 

​19.00 Reception at Oulu City Hall, Kirkkokatu 2 A
Guided 3-minute walk starting from Hotel Scandic lobby at 18.45

Wednesday 8th June 2016

Session 3: RAPID DIAGNOSTICS AND HEALTH 

​9.00 - 10.40 Invited speeches (20min)
​Disposable Patient Monitor​Erno Muuranto, GE Healthcare
​Printable diagnostics for consumers - innovative and easy-to-use alcohol testPetri Särkelä, Goodwiller
​​High volume manufacturing of point-of-care diagnostics and medical devicesMarkku Känsäkoski, Ginolis
​​Real time 3D-measurement of moving web: microfluidics, conductors and surface roughness

Sauli Törmälä, Focalspec

Technology is developing fast – do we remember to whom we develop? Aging population and challenges in usability​Katja Kääriä, Med Group
Break 5 min
10.45 - 11.30    Company pitches​ (5min)
​Into medical and beyond by printing​Antti Tauriainen, Screentec
Portable liquid biosensing technologyJoni Leinvuo, BioMensio
​CPI developing products and partnerships in printable electronics

Sandy Gunn, CPI

​Wireless applications for thin, printed batteries​​​Anja Talo, Enfucell
​Use of ALD in several TOLAE end-use cases

Marko Pudas, Picosun

​Rattle Cages for New IdeasAntti Backman, Delektre Oy
​Sensapex RPC - Service SupplyLauri Törrö, Sensapex
11.30 - 12.30 Lunch - Demos, Bazar, Matchmaking​​ ​

Session 4: INTERNET OF THINGS

12.30 - 14.20 Invited speeches (20min)
​La Liga LabsDomingo Egea, Barrabés Next
​Injection Molded Structural Electronics for mass production​​Antti Keränen, TactoTek
​Flexible Electronics: Low cost intelligent solutions​Brian Cobb, PragmatiC
​The face of the Internet of ... everything​​Inês Henriques, Ynvisible
Taking home security to the next level​Pekka Topp, Securitas
​Summary and closing

​Ilkka Kaisto, VTT, PrintoCent

14.30 - 16.30 PILOT FACTORY VISITS / VTT​ ​

Guided 5-minute walk from University of Oulu to VTT, meeting point at Info desk at 15.00
After the Pilot Factory visit the bus takes you back to Hotel Scandic at 16.30

 Wed 8th June, bus transportation from University of Oulu via hotel Scandic to Oulu Airport at 15.00 (30 min to airport)

CUSTOMER SERVICE
Emailinfo@vtt.fi
Tel.+358 20 722 7070
Opening hours Mon - Fri 9:00 - 11:00 and 12:00 - 15:00, UTC +3 time zone

CONTACT US

P.O. Box 1000, FI-02044 VTT, Finland
Tel. exchange +358 20 722 111
Opening hours Mon - Fri 8:00 - 16:30,
UTC +3 time zone

CUSTOMER SERVICE

info@vtt.fi
Tel. +358 20 722 7070
Opening hours Mon - Fri 9:00 - 11:00 and 12:00 - 15:00,
UTC +3 time zone